Product Code
|
SOUTS0180-00
|
Semi-Automatic Cone Penetrometer for Liquid Limit
|
|
SOUTS0182-00
|
Liquid Limit Penetration Test Cone, Stainless Steel, 30° and 80 g
|
|
SOUTS0183B-0
|
Cone Test Gauge for 30° Angle Cone, BS
|
|
SOUTS0183E-0
|
Cone Test Gauge for 30° Angle Cone, EN ISO
|
|
SOUTS0184-00
|
Liquid Limit Penetration Test Cone, Stainless Steel, 60° and 60 g
|
|
SOUTS0185E-0
|
Cone Test Gauge for 60° Angle Cone, EN ISO
|
|
SOUTS0187E-0
|
Liquid Limit Penetration Test Cone, Stainless Steel, 30° and 100g, EN ISO
|
|
SOUTGH1435-0
|
Penetration Sample Cup / Moisture Content Tin with Lid, 75x50mm, Aluminum
|
|
SOUTGH1440-0
|
Penetration Sample Cup / Moisture Content Tin with Lid. Ø55×30 mm, Aluminium
|
|
SOUTGH1442-0
|
Penetration Sample Cup / Moisture Content Tin with Lid. Ø55x40mm, Aluminium
|
|
SOUTGH1444-0
|
Penetration Sample Cup / Moisture Content Tin with Lid. Ø55x40mm, Stainless Steel
|
|
Models for 220-240V 50-60 Hz, 1ph
|
SOUTS0180-00
|
|
Models for 110-120V 60 Hz, 1ph
|
SOUTS0180N-0
|
A-2: Liquid Limit Casagrande Device
Complies with ASTM D4318; AASHTO T89, T90.
Products Codes:
|
SOUTS0202-00
|
Manual Liquid Limit Device (Casagrande),
ASTM-AASHTO
|
|
SOUTS0212-00
|
Motorized Liquid Limit Device (Casagrande),
ASTM-AASHTO
|
|
SOHU4229-000
|
Liquid Limit ASTM Metal Grooving Tool and Gauge Block
|
|
SOHU4232-000
|
Liquid Limit Metal Grooving Tool, AASHTO
|
|
SOHU4229P-00
ASTM Plastic Grovving Tool (Pack 10)
SOHU4904-000
Straight Edge Spatula, 4″ x 0.75″ SOUTS0225A-0 Spare Brass Cup for
ASTM and AASHTO models.
B: Plastic Limit Testing Tools
Plastic limit is a test that involves rolling out a thread of the fine portion of a soil on a flat, non-porous surface.
The procedure is defined in ASTM Standard D4318.
If the soil is at a moisture content where its behavior is plastic, this thread will retain its shape down to a very narrow diameter.
The sample can then be remolded and the test repeated.
As the moisture content falls due to evaporation, the thread will begin to break apart at larger diameters.
The plastic limit is defined as the moisture content where the thread breaks apart at a diameter of 3.2 mm (about 1/8 inch).
A soil is considered non-plastic if a thread cannot be rolled out down to 3.2 mm at any moisture possible.
|
|
|
C: Shrinkage Limit Testing Tools
Shrinkage limit is a test that evaluates the water content of a soil where further
loss of moisture will not result in an additional volume reduction.
The test to determine the shrinkage limit is ASTM D4943.
The shrinkage limit is much less commonly used than the liquid and plastic limits.
|
